Signamax 10/100/1000 to Gigabit SFP DIN Rail Mount Industrial Media Converter - Manual (Page 8)

Signamax    Gigabit SFP Hardened Media Converter
User’s Manual 5
The Gigabit SFP socket with SFP fiber transceiver should
be set to (forced full duplex mode, forced full duplex
mode) or (auto mode, auto mode) when two
10/100/1000BaseT/TX and Gigabit SFP socket one-
channel media converters are connected to each other
via the Gigabit SFP socket with a SFP fiber transceiver.
Full wire-speed forwarding rate.
Back-pressure & IEEE802.3x compliant flow control.
Alarms for power and port link failure by relay output.
Relay contact rating with current 1A @ 30VDC, 0.5A @
120VAC.
Operating voltage and Max. current consumption: 1A @
12VDC, 0.5A @ 24VDC, 0.25A @ 48VDC. Power
consumption: 12W Max.
Power Supply: Redundant DC Terminal Block power
inputs or 12VDC DC JACK with 100-240VAC external
power supply.
Field Wiring Terminal Markings: Use Copper Conductors
Only, 140/167
℉ (60/75 ℃ ), wire range 12-24 AWG,
torque value 7 lb-in.
-40
℉ to 167℉ (-40℃ to 75℃) operating temperature
range. Tested for functional operation @ -40
℉ to 185℉
(-40
℃ to 85 ℃). UL508 Industrial Control Equipment
certified Maximum Surrounding Air Temperature @ 167
℉ (75℃).
For use in Pollution Degree 2 Environment.
Supports DIN-Rail, Panel, or Rack Mounting installation.
Front panel status LEDs.
Both of the Gigabit SFP socket with SFP fiber transceiver
should be forced to full duplex mode (or auto mode) when
two 10/100/1000BaseT/TX and Gigabit SFP socket one-
channel media converters are connected to each other via
the Gigabit SFP socket with a SFP fiber transceiver.