beautypg.com

Connecting to power, 1895 series hardened media converter, User’s manual – Signamax Gigabit Ethernet Industrial DIN Rail Mount Компьютерные Аксессуары User Manual

Page 8

background image

065-1895 series Hardened Media Converter

8

User’s Manual

Connecting to Power

Redundant 1.5A 24VDC power inputs or 3A 12VDC Jack:

3A 12VDC Jack

Step 1: Connect the supplied AC to DC power adapter to the receptacle on

the topside of the media converter.


Step 2: Connect the power cord to the AC to DC power adapter and attach

the plug into a standard AC outlet with the appropriate AC voltage.

Redundant 1.5A 24VDC Power Inputs

There are two pairs of 1.5A 24VDC power sources that can be used to
power up this device. You only need to have one power source connected
to run the media converter.

Step 1: Connect the DC power cord to the plug-able terminal block on the

media converter, and then plug it into a standard DC outlet.

Step 2: In order to shut down the media converter, disconnect the power

cord.