Signamax Gigabit Ethernet Industrial DIN Rail Mount Компьютерные Аксессуары - Manual (Page 5)

065-1895 series Hardened Media Converter
User’s Manual 5
One-Channel Media Converter
Ports
The Converter provides one copper port and one fiber port. The fiber port
provides options of Multi-mode fiber or Single-mode fiber using an SC
connector.
The copper port uses RJ-45 connector, auto-MDIX, and auto negotiates.
Port Settings
Port settings are made very simple by means of a DIP (Dual Inline
Package) switch on the front panel of the hardened media converter.
Default DIP switch settings:
1 2 3 4 1
0
DIP Switch
There are four pins on the DIP switch for port settings. Refer to the table below for more
details.
DIP switch No. 0 1
1 Disable Link Fault Signaling Enable Link Fault Signaling
2 Enable auto negotiation for
fiber port Enable forced mode for fiber
port
3 Disable link down alarm for
copper port Enable link down alarm for
copper port
4 Disable link down alarm for
fiber port Enable link down alarm for fiber
port