OT Systems FTD100Micro - Manual (Page 5)

FTD100Micro Series Installation & Operation Manual
www.ot-systems.com 5
(2) Product Overview
2.1 Introduction
The FTD100Micro Series products comprise of either single-mode or multi-mode fiber optic
transmitters and receiver s for the optical transmission of ONE forward (Tx → Rx) video on one
fiber. The products work at wavelengths of 1310nm or 1550nm with either a 9/125um or
62.5/125um fiber for single-mode or multi-mode transmission respectively.
A non-compressed 8-bit digital video transmission scheme is implemented which supports
video in NTSC, PAL and SECAM formats.
For single-mode transmission, we also offer specifically designed products for long-haul
transmissions up to 60km. These models include the letter “L” in the suffix, e.g.
FTD100Micro-SSTL for Tx, FTD100Micro-SSRL for Rx, etc.
The FTD100Micro Series units are available as standalone Micro sized cubicle, which can
be mounted horizontally or vertically wall-mounted on any fixture. The Micro unit comes with an
external power supply FT-PA/12V, which can be powered by local 110/220V power.
2.2 Models selection table
Mod
e
Model
1
Description
Installation
requirements
Remarks
S
Ing
le
-M
od
e
FTD100Micro-SST Single-mode 1-Ch Video Transmitter
Micro Unit
Horizontally or
vertically
wall-mounted
Micro sized
cubicle
FT-PA/12V
external
power
adaptor is
included for
the Micro
unit
2
FTD100Micro-SSTL Single-mode Long-haul 1-Ch Video
Transmitter Micro Unit
FTD100Micro-SSR Single-mode 1-Ch Video Receiver
Micro Unit
FTD100Micro-SSRL Single-mode Long-haul 1-Ch Video
Receiver Micro Unit
Mu
lt
i-
Mo
de
FTD100Micro-SMT Multi-mode 1-Ch Video Transmitter
Micro Unit
FTD100Micro-SMR Multi-mode 1-Ch Video Receiver
Micro Unit
1 If the optical connector is FC type, the suffix in the model number will be “-FXX”. Eg. FTD100Micro-FST
2 FT-PA/12V works under 100 -240VAC, 50/60Hz power supply