OT Systems FTD100Micro - Manual (Page 10)

FTD100Micro Series Installation & Operation Manual
www.ot-systems.com 10
(6) Specifications
MODELS*
PARAMETERS
FTD100Micro-SST(R)
(Single-Mode)
FTD100Micro-SST(R)L
(Single-Mode)
FTD100Micro-SMT(R)
(Multi-Mode)
OPTICAL
No. of Fiber / Connector 1 / ST(or FC) 1 / ST(or FC) 1 / ST(or FC)
Wavelength 1310 nm 1310 nm 1310 nm
Optical Power Budget 17 dB 24 dB 23 dB
Max Distance 40 km 60 km 4 km
ELECTRICAL VIDEO
Channel / Connector 1 / BNC
System PAL, NTSC, SECAM
Bandwidth ≥ 6.0 MHz
Input/Output Impedance 75 Ohm
Input/Output Level 1.0 Vp-p typical
Differential Gain < 1% typical
Differential Phase < 1
o
typical
SNR >60dB
POWER
Power consumption 12VDC @ 1.8W
Power supply FT/PA12V DC Adaptor
Connector (Micro unit) 2-pin Screw Terminal
PHYSICAL
Weight 0.1 kg
Dimensions (W x H x D) 36.2 x 24.5 x 101 mm (MAX)
ENVIRONMENTAL
Operating Temperature -40
o
C ~ +75
o
C
Storage Temperature -40
o
C ~ +85
o
C
Relative Humidity 0 ~ 95% non-condensing
MTBF >100’000 Hours
*
If the optical connector is FC type, the suffix in the model number will be “-FXX”. Eg. FTD100Micro-FST