OT Systems ET2111 series - Manual (Page 7)

ET2111 Series Installation & Operation Manual
www.ot-systems.com 7
(3) Installation
3.1 General
All OT Systems products are thoroughly inspected, tested and securely packaged before
delivery to ensure a stable, intact and trouble-free service. Please check the equipment upon
receipt for any visible damage which may have been caused during shipping.
3.2 Package Contents
When you unpack the product package, you shall find the items listed below. Please inspect
the contents, and report any apparent damage or missing items immediately to your authorized
reseller.
 Ethernet Switch
 Quick Installation Guide
 External power adapter & Power Cord (for Standalone Wall-mount type)
The Standalone type ET2111 Series (Fig. 3.1) can be either horizontally or vertically
wall-mounted, or fits within the most camera housings, etc. It works with an external 12VDC
power supply.
Fig. 3.1 ET2111
The Card module can be used as slide-in module to the 19 ” 3U high converter rack ET-C12.
See Fig.3.2(a) for the 12-slot Rack Mount Chassis which can be purchased separately; Fig.3.2(b)
for card module.
Fig. 3.2 (a) ET-C12 Fig. 3.2 (b) Card module