OT Systems ET2111 series - Manual (Page 11)

ET2111 Series Installation & Operation Manual
www.ot-systems.com 11
(4) Cable Connections & Setup Procedures
4.1 System cable connections
Signal
Type
Cable Type Connector For details,
please refer to
Optical Single-mode or Multi-mode fiber SC or ST Connector Section 4.2.2
Ethernet Twisted-pair Cable
10BASE-T: UTP/STP Cat3, 4, 5
100BASE-TX: UTP/STP Cat 5
RJ45 Connector Section 4.2.1
12VDC Power cord DC JACK (Standalone
Wall-mount type) or
Golden finger (Card Module)
within the ET-C12
Section 3.4
Wiring Diagram
Fig 4.1 Switches connection diagram