OT Systems ET2111 series - Manual (Page 15)

ET2111 Series Installation & Operation Manual
www.ot-systems.com 15
(6) Specifications
Ethernet
Standards IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/FX
IEEE 802.3x
Processing Type Store-and-Forward
Half-duplex and IEEE802.3x Full-duplex flow control
Forward and Filter Rate
10Base-T
100Base-TX/FX
14,881pps (10Mbps)
148,810pps (100Mbps)
Cabling
10BASE-T
100BASE-TX
UTP/STP Cat. 3, 4, 5 or above
UTP/STP Cat. 5 or above
Maximum Distance
Cat5 UTP Up to 100m
Connector
10/100BASE-TX 2 X RJ45
Address table size: 2048MAC addresses
Optical
Cabling
62.5/125μm (Multi-mode)
9/125μm (Single-mode)
Maximum Distance
Multi-mode fiber 2Km
Single-mode fiber 20Km
Wavelength(s) 1310nm
1310/1550nm
Connector SC or ST
Electrical and Mechanical
Input Power 12VDC (DC Jack by power adapter for standalone units)
5VDC (from ET-PSU/5V for card module)
Power Consumption 2.4W Max.
Operating Voltage & Max.
Current Consumption
0.2A @ 12VDC