OT Systems ET8242M-S-DR - Manual (Page 4)

ET8242M-S-DR
Managed Industrial 8-port 10/100/1000Base-T/X SFP Combo + 4-port 1000Base SFP
Ethernet Switch
4
Login in the Console Interface
When the connection between Switch and PC is ready, turn on the PC and run a terminal emulation program or Hyper Terminal and
configure its communication parameters to match the following default characteristics of the console port:
Baud Rate: 115200 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
Having finished the parameter settings, click ‘OK’. When the blank screen shows up, press Enter key to have the
login prompt appears. Key in ‘root’ (default value) for both User name and Password (use Enter key to switch),
then press Enter and the Main Menu of console management appears. Please see below figure for login screen.
Console login interface