OT Systems ET8242M-S-DR - Manual (Page 2)

ET8242M-S-DR
Managed Industrial 8-port 10/100/1000Base-T/X SFP Combo + 4-port 1000Base SFP
Ethernet Switch
2
Mini-GBIC combo port:
8 auto-detect Giga port —UTP or fiber. The gigabit Ethernet ports are hared with the mini-GBIC ports. UTP (Gigabit Ethernet) ports can
operate in half/full-duplex modes and work at speeds of 10/100/1000Mbps that support auto-sensing technology to enable each port to detect
the connecting speed. The mini-GBIC port is a joint for a mini-GBIC (SFP) transceiver, the switch can be connected through fiber to another
one.
Use four twisted-pair, Category 5e or above cabling for RJ-45 port connection. The cable between the switch and the link partner (switch,
hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
Use the mini-GBIC ports to uplink to another switch by inserting the mini-GBIC (SFP) transceiver.