OT Systems ET24122MPp-S - Manual (Page 2)

ET24122MPp-S
24-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Managed PoE Ethernet Switch
V1.1 2
Installation
SFP Transceiver Module
You can select different SFP modules as required (Please refer to our SFP selection list for the
appropriate module).
To insert/remove the SFP, the procedures are as follows :
1. On the front panel, insert the SFP module into the SFP port until it is
securely locked.
2. Connect the optical fiber (1/2 core) to the LC connector(s) of the SFP.
3. To remove the SFP module, press down the lock of the LC connector of the
optical fiber to pull out the fiber cable.
4. Pull down the SFP lever and hold its position. Pull out the SFP module
from the SFP port.