Installing the wi-fi and gprs/umts/hsdpa modules – NEXCOM nROK 5300 User Manual
Page 59
46
Chapter 3: System Setup
Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved
nROK 5X00 Series User Manual
Installing the Wi-Fi and GPRS/UMTS/HSDPA Modules
1. The Mini PCI Express slot shown below is used to install a Wi-Fi, 3.5G
communication module such as GPRS, UMTS or HSDPA module.
WWAN
Mini PCI
Express slot
Wi-Fi
Mini PCI
Express slot
3. Insert the module into the mini PCI Express slot at a 45 degrees angle
until the gold-plated connector on the edge of the module completely
disappears inside the slot.
4. Push the module down then secure it with mounting screws.
5. Attach one end of the RF cable onto the module
This manual is related to the following products: