Dell 3000CN - Manual (Page 24)

24 Setting Up for Network Printing
www
.del
l.
com/sup
pli
e
s |
su
ppo
rt.
d
e
ll.
co
m
Network Set-Up
NOTE: For additional network set-up configurations, refer to your User’s Guide.
Print and Check the Printer Settings Page
1. Print the Printer Settings page.
a. When Ready to Print appears in the LCD, press Menu.
b. Press until Configure appears, and then press or .
c. Press until Reports appears, and then press or .
d. Printer Settings is displayed. Press .
The Printer Settings page is printed.
2. Under the TCP/IP heading, verify the IP address.
If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically,
and then print the Printer Settings page again.
Run the Installation Software
1. Insert the Drivers and Utilities CD into your computer.
2. The Drivers and Utilities CD should launch the installation software automatically.
If the CD does not automatically launch, click Start → Run, type D:\CDFE.exe (where D is
the drive letter of your CD), and then click OK.
3. When the Drivers and Utilities CD screen appears, click Network Installation - Install the
printer for use on a network. If using Windows XP, Windows 2000, Windows NT 4.0, or
Windows 2003 Server, go to step 4. For all other operating systems, go to step 5.
4. For local installation, select Local Installation - Install printer on this computer, and then
click Next.
For remote installation:
a. Select Remote Installation - Install printer on one or more remote computers, and then
click Next.
b. Enter your Administrator user name, password, and clients or servers and then click Add.
c. Click Next.
5. Select the network printer you would like to install. If you do not see your printer listed, click
Update to refresh the list or click Add Printer to add a printer to the network. You may update
the IP address and port name at this point. Click Next.
6. Select your printer from the list. If you would like to change the printer name listed, enter a
new name in the Printer Name field.