NEXCOM APPD 1200T - Manual (Page 47)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 32
Chapter 3: System Setup
APPD 1200T/1205T/1500T/1700T/1900T User Manual
8. Plug the positive, negative and GND wires of the DC power cable into
the corresponding pins on the DC input, then tighten the screws on the
terminal blocks to secure the wires.
9. Plug the AC power cord into the power adapter.
CAUTION! CAUTION! CAUTION!
Before plugging the DC power cable wires into the DC input, use
a multimeter or voltmeter to measure which wire is positive “+”,
negative “-” and GND, and ensure that they are connected to
the correct pins.
AC power cord