NEXCOM APPD 1200T - Manual (Page 40)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 25
Chapter 3: System Setup
APPD 1200T/1205T/1500T/1700T/1900T User Manual
Chapter 3: System Setup
Panel Mounting
1. Select a place on the panel where you will mount the Industrial Touch
Monitor.
2. Cut out a shape on the panel that corresponds to the Industrial Touch
Monitor’s rear dimensions.
The thickness of the panel (e.g. steel board, plank, acrylic board, wall,
etc.) where you will mount the Industrial Touch Monitor must not exceed
3mm for APPD 1500T/1900T and 4mm for APPD 1200T/1205T/1700T. If
the distance between the front bezel and panel mount hole is too wide,
it will not fit the panel mount kit.
304.50 4.00mm
230.00
371.00 3.00mm
297.00
APPD 1200T/1205T
APPD 1500T