NEXCOM IPPD 1600P User Manual

Page 34

Text mode
Original mode

Chapter 3: System Setup

IPPD 1600P/1800P/2100P User Manual

CAUTION!

Do not overtighten the screws to prevent damaging the
Panel PC.

3. Slide the Industrial Touch Monitor through the hole until it is properly

fitted against the panel.

4. Position the mounting clamps along the rear edges of the Industrial Touch

Monitor. The first and second clamps must be positioned and secured
diagonally prior to mounting the rest of the clamps. Tighten the clamp’s
screw until it touches the panel.

This manual is related to the following products:

IPPD 1800P IPPD 2100P