NEXCOM IPPD 1600P - Manual (Page 23)

Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved. 8
Chapter 1: Product Introduction
IPPD 1600P/1800P/2100P User Manual
Rear Bottom View
External I/O Description
USB VGA DisplayPort DVI-D DC Input
Touchscreen Connector (USB) (Optional)
This USB connector must be attached to the USB port of the PC. The
touchscreen cable is included in the accessory box.
DVI Port (DVI-D)
Connected with a standard DVI connector through I/O port of this unit. Only
supports digital signals.
VGA Port (DB-15)
Used to connect an analog VGA monitor.
DisplayPort
DisplayPort to connect the system with display devices.
12 – 24V DC Input
Terminal block socket used to plug a DC power cord.
External I/O