Knowing your ippd series, Rear view, Power & osd menu button description – NEXCOM IPPD 1600P User Manual
Page 22: Rear view power & osd menu button description
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
7
Chapter 1: Product Introduction
IPPD 1600P/1800P/2100P User Manual
Knowing Your IPPD Series
Rear View
Power & OSD
Menu Buttons
Power & OSD Menu Button Description
LED
Power Switch
Increase Brightness/
move down/
increase value
Menu
Decrease Brightness/
move up/
decrease value
AUTO|EXIT
LED
Displays the power status of the display. Green LED indicates the display is
switched on, if the display is not connected to a computer, the LED will flash red.
Power Switch
Press to power-on or power-off the display.
◀|▼
Inside OSD menu: Press to move the selection down in OSD menu.
Configuring options: Press to increase the value.
▶|▲
Inside OSD menu: Press to move the selection up in OSD menu.
Configuring options: Press to decrease the value
OSD Menu
No OSD Menu: Press to load the OSD menu.
Inside OSD Menu: Press to select the highlighted option in OSD menu.
AUTO|EXIT
Press to exit the OSD menu, or return to main menu.