System agent (sa) configuration – NEXCOM NISE 3600E User Manual
Page 88

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
74
NISE 3600E Series User Manual
Chapter 4: BIOS Setup
Restore AC Power Loss
Chipset
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select AC power state when
power is re-applied after a power
failure.
► USB Configuration
► PCH Azalia Configuration
LAN2 Controller
PCH LAN Controller
Wake on LAN
Restore AC Power Loss
[Enabled]
[Enabled]
[Enabled]
[Power On]
Select AC power state when power is re-applied after a power failure.
Restore AC Power Loss
Power Off
Power On
System Agent (SA) Configuration
This section is used to configure the System Agent (SA) configuration.
Chipset
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Check to enable VT-d function
on MCH.
VT-d
► Graphics Configuration
► NB PCIe Configuration
[Enabled]
VT-d
Enables or disables VT-d function on MCH.
Graphics Configuration
Configures the graphic chip settings.
NB PCIe Configuration
Configures the NB PCI Express settings.