NEXCOM NISE 3600E - Manual (Page 100)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 86 NISE 3600E Series User Manual
Appendix B: GPI/O Programming Guide
Appendix B: GPI/O Programming Guide
GPI/O (General Purpose Input/Output) pins are provided for custom system
design. This appendix provides definitions and its default setting for the
ten GPI/O pins in the NISE 3600 series. The pin definition is shown in the
following table:
Pin GPI/O mode PowerOn
Default
Address Pin GPI/O mode PowerOn
Default
Address
1 VCC - - 2 GND - -
3 GPO0 Low A04h (Bit4) 4 GPI0 High A04h (Bit0)
5 GPO1 Low A04h (Bit5) 6 GPI1 High A04h (Bit1)
7 GPO2 Low A04h (Bit6) 8 GPI2 High A04h (Bit2)
9 GPO3 Low A04h (Bit7) 10 GPI3 High A04h (Bit3)
Control the GPO pin (3/5/7/9) level from I/O port A04h bit (4/5/6/7).
The bit is Set/Clear indicated output High/Low.