Installing the cpu – NEXCOM NISE 3100eP2 User Manual

Page 48

Chapter 3: System Setup

NISE 3100e, NISE 3100eP2, NISE 3150e User Manual

Installing the CPU

1. Loosen the mounting screws that secure the heat sink to the chassis.

Make sure all power cables are unplugged before you install the

•

CPU.
The CPU socket must not come in contact with anything other

•

than the CPU. Avoid unnecessary exposure.

Heat sink

Mounting

screw

2. The gold triangular mark on the CPU must align with pin 1 of the CPU

socket.

Gold triangular

mark

Handle the CPU by its edges and avoid touching the pins.

CPU

socket