NEXCOM NISE 2200 - Manual (Page 89)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 75 NISE 2200 User Manual
Chapter 4: BIOS Setup
Onboard Serial Port Max Baud Rate
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Change the Serial Port Max Baud
Rate. Select <115200 bps> or
<921600 bps> Serial Port 3 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port 3 Mode
Onboard Serial Port Max Baud Rate
[Enabled]
IO=2E8h; IRQ=7;
[IO=2E8h; IRQ=7;]
[RS232]
[115200 bps]
Onboard Serial Port Max Baud Rate
115200 bps
921600 bps
This field configures the maximum baud rate of the serial port 3, the options
are 115200 bps and 921600 bps.
Enable GPS
This field is used to enable or disable GPS.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable GPS or not Super IO Configuration
Super IO Chip
 Serial Port 0 Configuration
 Serial Port 1 Configuration
 Serial Port 2 Configuration
 Serial Port 3 Configuration
Enable GPS
 Serial Port 5 Configuration
IT8783F
[Enabled]
Enable GPS
Disabled
Enabled