Serial-ata controller 1, Usb configuration – NEXCOM NISE 2200 User Manual
Page 77

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
63
NISE 2200 User Manual
Chapter 4: BIOS Setup
Serial-ATA Controller 1
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable / Disable Serial ATA
Controller 1
SATA Configuration
SATA Port0
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
SATA Mode
Serial-ATA Controller 0
Serial-ATA Controller 1
Hitachi HTE545 (160.0
Not Present
32GB SATA Flas (32.0G
Not Present
Not Present
Not Present
[IDE Mode]
[Compatible]
[Enhanced]
Disables or sets the SATA controller operating mode as Enhanced.
Serial-ATA Controller 1
Disabled
Enhanced
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
USB Configuration
USB Devices:
1 Keyboard
Legacy USB Support
EHCI Hand-off
[Enabled]
[Disabled]
USB Configuration
This section is used to configure the USB.