NEXCOM NISE 2200 - Manual (Page 31)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 17 NISE 2200 User Manual
Chapter 2: Jumpers and Connectors
LAN1 #1
LAN1/LAN2 Link/Active LEDs
Connector location: LED1 and LED2
#2
LAN2
LNK
ACT
LNK
ACT
#3 #4
PW
CFast
HDD1
HDD2
Status LED Color Definition
LAN1/LNK Green Link status of LAN1
LAN1/ACT Yellow Network activity of LAN1
LAN2/LNK Green Link status of LAN2
LAN2/ACT Yellow Network activity of LAN2
Status LED Color Definition
#1/RX Green Receive signal of COM1
#1/TX Yellow Transmit signal of COM1
#2/RX Green Receive signal of COM2
#2/TX Yellow Transmit signal of COM2
RX
TX
RX
TX
Status LED Color Definition
#3/RX Green Receive signal of COM3
#3/TX Yellow Transmit signal of COM3
#4/RX Green Receive signal of COM3
#4/TX Yellow Transmit signal of COM4
Status LED Color Definition
PW Green Power status of the system
CFast Yellow Activity of CFast
HDD1 Yellow Activity of HDD1
HDD2 Yellow Activity of HDD2
LAN Ports
COM1 and COM2
COM3 and COM4
Power, CFast, HDD1 and HDD2
Note: LED indication of NISE2200/NISE2300 is controlled by HDD/SSD/CFast itself. Some
HDD/SSD/CFast might not flash due to its design limitation.
Flashing
LED
On
No
LED
SSD Apacer SSD APS25P6B032G-CCM 32G 
Apacer SSD APS25P6B032G-CTW 32G 
Apacer SSD APS25P6B064G-CCM 64G 
2.5” HDD
2.5” HDD Toshiba MK1676GSX 160G 
2.5” HDD Hitachi HTS541640J9SA00 40G 
2.5" HDD Seagate ST9160314AS 160G 
2.5" HDD Fujitsu MHZ008DBH 80G 
Cfast Cfast Transcend 8G 
Cfast Apacer APCFA004GT6HS-ETT 4G 
Cfast Unigen UGB31JAC8000A1 8G 