NEXCOM NISE 2200 - Manual (Page 58)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 44 NISE 2200 User Manual
Chapter 3: System Setup
Installing a SO-DIMM
1. Locate the SO-DIMM socket.
SO-DIMM
socket
DIMM1
DIMM2:
1
st DIMM to be installed
2. Release the lock of the SO-DIMM socket.
Lock
3. Insert the module into the socket at an 90 degree angle. Apply firm and
even pressure to each end of the module until it slips into the socket.
SO-DIMM
4. While pushing the SO-DIMM into the position, the lock will close
automatically.
1
2
NOTE: If only one SO-DIMM will be installed, DIMM 2 must be installed first.
SO-DIMM (Lock type)