NEXCOM EBC 353 - Manual (Page 54)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 39 EBC 353 User Manual
Chapter 3: BIOS Setup
Serial Port 3 Configuration
This section is used to configure serial port 3.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Onboard Serial Port Max Baud Rate
Select this to change the max baud rate of the serial port.
H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
CPU Temperature
Detects and displays the current CPU temperature.
System Temperature
Detects and displays the current system temperature.
CPU FAN Speed
Detects and displays the current CPU fan speed.
CPU: Vcore
Detects and displays the output voltages.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM) Serial Port 3 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port Max Baud Rate
[Enabled]
IO=2F8h; IRQ=6;
[IO=2F8h; IRQ=6;]
[115200 bps]
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PC Health Status
CPU Temperature
System Temperature
CPU FAN Speed
CPU: Vcore
+3.3V
+5V
+12V
: +34C
: +24C
: 6368 RPM
: +1.168V
: +3.264V
: +5.017V
: +11.827V