Monroe Electronics Charge Plate - Analyzer - model 300 User Manual
Page 14
14
+++ ---B
Automated Test Sequence: Set the desired number and order of tests
for an automated sequence of tests. “+”represents a positive decay
test in the sequence. “-“ represents a negative decay test in the
sequence. “B” represents a balance (offset voltage) test in the
sequence. The choices for an automated test sequence are +-, +-+- +-,
+++---, +-B, +-+-+-B, and +++---B. The factory default is +++---B.
DEFT SET
Use this set up option to restore all set up options to their factory
default settings. Press
SELECT and then the ↑ and ↓ buttons to
choose “YES” or “NO” to restore the factory defaults edit the value
using. Once the desired value is displayed, press the
SAVE button to
save the new value for the feature. SAVE OPT is displayed
momentarily.
CLR DATA Use this set up option to clear all saved test results. Press
SELECT
and then the
↑and ↓ buttons to choose “YES” or “NO” to restore the
factory defaults edit the value using. Once the desired value is
displayed, press the
SAVE button to save the new value for the
feature. SAVE OPT is displayed momentarily.
Press the
Shift/Cancel button again to return to the system prompt, -.-.