Monroe Electronics Electrostatic Voltmeter - Isoprobe® - model 244A - Manual (Page 18)

17
One possible configuration is illustrated in Figure A-l-1.
For general bench use burette or utility clamps attached to a ringstand or similar support may
prove adequate. These are available from scientific supply houses.
An attractive alternative to clamping is the use of double sided adhesive tape or fast-setting
polymerizing adhesives such as LOCTITE1 SuperBonder 495 cyanoacry- late adhesive or
equivalent which does not require long setting or curing time and provides a relatively permanent
bond. LOCTITE* is a registered trademark of and is available from: LOCTITE CORPORATION
Newington, CT 06111 (208)278-1280