Knox Video RSII - Manual (Page 7)

Output Impedance: 75 ohms
Crosstalk: less than -70dB@5MHz
Connectors: 75ohm female BNC for Composite, 4 pin DIN for
YC
Vertical interval switching with video on External Sync BNC
Maximum DC input:
+/-0.5V
RGB/Y, Pb, Pr: - NTSC, PAL or SECAM standards
Levels: 1v p-p
Frequency Response: DC to 130MHz
@ 1v <3dB down at 130MHz
Input Impedance: 75 ohms
Output Impedance: 75 ohms
Crosstalk: less than -70dB@5MHz
Connectors: 75ohm female BNC
Vertical interval switching with video on External Sync BNC
Maximum DC input:
+/-0.5V
SD SDI:
Input and Output specifications comply with SMPTE 259M standards
Automatic Equalization and Reclocking on all chanels
Supported rates of 143 MB/s, 177 MB/s, 270 MB/s, and 360 MB/s
Equalization 270MB/s up to 350 Meters of Belden 1694A cable
Connectors:
75 ohm female BNC
Vertical interval switching with composite analog video on External Sync
BNC
HD SDI:
Input and Output specifications comply with SMPTE 259M and 292M
standards
Automatic Equalization and Reclocking on all chanels
Supported rates of 143 MB/s, 177 MB/s, 270 MB/s, 360 MB/s, 540MB/s,
1.485/1.001 GB/s
Equalization at 1.485 GB/s up to 140 Meters of Belden 1694A cable
Connectors:
75 ohm female BNC
Vertical interval switching with composite analog video on External Sync
BNC
Page 2
KNOX VIDEO
RSII Routing Switcher System
Page 17
KNOX VIDEO
RSII Routing Switcher System
3.4.9 COMMAND SUMMARY
Bxyz/Bxxyyzz Both
Vxy/Vxxyy Video
Axy/Axxyy Audio
Exy/Exxyy Queue - both
Fxy/Fxxyy Queue - video
Gxy/Gxxyy Queue - audio
Xxyz/Xxxyyzz Salvo - both
Yxyz/Yxxyyzz Salvo - video
Zxyz/Zxxyyzz Salvo - audio
S Store powerup pattern
R Recall powerup pattern
Sxx Store numbered pattern
Rxx Recall numbered pattern
D Dump
C Clear
Cm Clear pattern memories
W Send signon message
$C Clear VTB to default values
$Ci Clear input trims
$Dxx Report VTB status
$Di Report input trim status
$Vxxvv Change volume level
$Vxx+ Increase volume level
$Vxx- Decrease volume level
$Bxxvv Change bass level
$Bxx+ Increase bass level
$Bxx- Decrease bass level
$Txxvv Change treble level
$Txx+ Increase trble level
$Txx- Decrease treble level
$Sxx Change input trim level