KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 57)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 57 of 88
2. Make sure you can see the
red dot on the safety latch.
Place the speaker's
connector into the lower
speaker in the mounting
position shown here.
3. Using a further ball lock pin,
secure the connector to the
speaker using the tilt angle
drill hole calculated by the
software CON:SEQUENZA+.
9.5.6 Mounting SEQUENZA 5 W to SEQUENZA 5 W, Stacked
Caution
For weight reasons, you may only lift, set up and mount max. one speaker.
1. Connect the SEQUENZA 5 W
speaker with the lower
SEQUENZA 5 W as described
in chapter 'Safe Connecting
and Disconnecting of the
Products' on page 21.
The gliding feet and
guide grooves help to
position the speaker.