Mounting variation: stand, 3 mounting variation: stand – KLING & FREITAG K&F SEQUENZA 5 W User Manual
Page 28
User's manual
K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015
Version 4.1
Page 28 of 88
A flying frame under a SEQUENZA 5 B
speaker is not absolutely necessary. It is,
however, very helpful when aligning the
speakers on an uneven surface.
The structural stability must always be
ensured!
see following chapter:
•
General Preparation
•
Mounting SEQUENZA 5 W to
SEQUENZA 5 B, Flown
•
Mounting SEQUENZA 5 W to
SEQUENZA 5 W, Flown
9.1.3
Mounting Variation: Stand
Warning
You may only mount a maximum of three speakers on a stand.
It is forbidden to mount a SEQUENZA 5 B speaker on a stand.
Before setup, make sure that there is a stable and even surface and the stand has a sufficient
load capacity.
The following illustrations show you the possible setup variations with the corresponding
chapters in which the working steps for the setup are explained.
Because the centre of gravity must always be directly above the stand, you must always check
the speaker configuration with the simulation software CON:SEQUENZA+.