KLING & FREITAG K&F SEQUENZA 5 W - Manual (Page 41)

User's manual K&F SEQUENZA 5 incl. accessories
KLING & FREITAG GMBH © 2015 Version 4.1 Page 41 of 88
Vertical setup:
1. Stand the transport case
vertically and remove the lid.
2. Insert the flying frame
connector into the
SEQUENZA 5 flying frame
and secure it with a ball lock
pin.
The magnet fitted on the
flying frame prevents the
connector from hindering
the subsequent steps of
setup.
3. Lift the prepared flying
frame onto the topmost
speaker.
Connect the flying frame
with the speaker as
explained in chapter
'Safe Connecting and
Disconnecting of the
Products' on page 21
Make sure you can see the
red dot on the safety latch.