KBC Networks FDVA4-M1T-R-WSC User Manual
Page 9
Manual-FDVA4-Rev1009.pdf
Page 9 of 11
www.kbcnetworks.com
Copyright © KBC Networks Ltd.
Connectors:
DC or AC Power Supply between 12V and 24V can be used on this product.
• DC:
＋
: +12VDC~+24VDC
－
: Power Supply Ground
• AC:
There is no difference between
＋/－; the power supply can be connected into the
device directly.
FIB: Fiber
Optic
ST
GND: Grounded pin
LEDs Definition:
POW: Power Supply.
On if power input is in OK.
FIB: Fiber Link.
Off if the link is in OK.
V1:
Channel 1 Video.
On if video output is in OK.
V2:
Channel 2 Video.
On if video output is in OK.
V3:
Channel 3 Video.
On if video output is in OK.
V4:
Channel 4 Video.
On if video output is in OK.
The others are reserved.
2.4 Caution
• Switch off all power supply before installation
• Ensure fiber is properly aligned to the receiving connector
• Do NOT stare at the fiber core