KBC Networks FDVA2-M2T-R-WSC - Manual (Page 8)

Manual-FDVA2-Rev1008.pdf Page 8 of 11 www.kbcnetworks.com
Copyright © KBC Networks Ltd.
LEDs Definition:
POW:
Power Supply. On if power input is in OK.
SYNC1: Fiber Link 1 and Video 1 Flash if the link isn’t in OK.
Off if the link is in OK but the video isn’t in OK.
On if the link and the video are all in OK.
SYNC2: Fiber Link 2 and Video 2
Flash if the link isn’t in OK.
Off if the link is in OK but the video isn’t in OK.
On if the link and the video are all in OK.
Receiver Right View
Connectors:
VIDEO 1: Channel 1 Video BNC, output
VIDEO 2: Channel 2 Video BNC, output
Receiver Left View
Connectors:
DC or AC Power Supply between 12V and 24V can be used on this product.
• DC:
＋ : +12VDC~+24VDC
VIDEO 2 VIDEO 1
＋ －
FIB1 FIB2 GND