Compliance, Need help, Emea – KBC Networks WESIIKT V221 17dBi to 17dBi Kit User Manual
Page 4: Apac, Fcc required information, Warranty information
Compliance
FCC
Industry Canada
RF Exposure Warning
CE Marking
RoHS/WEEE Compliance Statement
Installer Compliance Responsibility
Devices must be professionally installed and it is
the professional installer's responsibility to make
sure the device is operated within local country
regulatory requirements.
Please visit our website at
for full
compliance statements and
information
Need Help?
Visit our website
or contact your nearest KBC office or dealer:
USA
Phone:
+1 949 297 4930
Toll Free: +1 888 366 4276
Monday – Friday
7am-5pm Pacific Time
Email:
EMEA
Phone:
+44(0)1622 618787
APAC
Phone:
+65 98463323
FCC Required Information
Radio Frequency Interference Statement for
Class B Digital Devices
This equipment has been tested and found to comply
with the limits for an intentional radiator, pursuant to
Part 15, subpart C of the FCC Rules. This equipment
generates, uses and can radiate radio frequency
energy. This equipment generates, uses, and can
radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may
cause harmful interference to radio communications.
The limits are designed to provide reasonable
protection against such interference in residential
situations. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause interference to radio or
television reception, which can be determined by
turning the equipment on and off, the user is
encouraged to try to correct the interference but on
or more of the following measures:
Re-orientate or relocate the receiving antenna
of the affected radio or television.
Increase the separation between the
equipment and the affected receiver.
Connect the equipment and the affected
receiver to power outlets on separate circuits.
Consult the dealer or an experienced radio/TV
technician for assistance.
Shielded cables must be used with this unit to
ensure compliance with Class B FCC limits.
Changes or modifications to this unit not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment.
Changes or modifications not expressly
approved by KBC could void the user’s
authority to operate the equipment.
FCC Power Output Restrictions
The FCC does not require licensing to implement this
device. License-free operation in the industrial,
scientific and medical band is documented in FCC
Rules Part 15.247. It is the responsibility of the
individuals designing and implementing the radio
system to ensure compliance with any pertinent FCC
Rules and Regulations. This device must be
professionally installed.
Exposure to Radio Frequency Fields
The WESII is designed to operate on the 5 GHz
frequency band with up to 50 Watts EIRP maximum
transmit power. This level of RF energy is above the
Maximum Permissible Exposure (MPE) levels
specified in FCC OET65:97-01. The following
precautions must be taken during installation of this
equipment:
The installed antenna must not be located in a
manner that allows exposure of the general
population to the direct beam path of the
antenna at a distance less than 20cm.
Installation on towers, masts, or rooftops not
accessible to the general population is
recommended or alternatively mount the
antenna in a manner that prevents any
personnel from entering the area within 20cm
from the front of the antenna.
It is recommended that the installer place
radio frequency hazard warnings signs on the
barrier that prevents access to the antenna.
During installation and alignment of the
antenna, do not stand in front of the antenna
assembly.
During installation and alignment of the
antenna, do not handle or touch the front of
the antenna.
Warranty Information
KBC extends the following LIMITED WARRANTY to the original
owner/purchaser of this product as follows:
- Two years from the date of initial sale for all wireless products.
If, within the specified warranty period, this product, or any part or
portion thereof, shall prove upon examination by KBC, to be defective
in material or workmanship, KBC will repair or replace such part or
portion at KBC’s option. The warranty period on the repaired or
replaced part or portion of this product shall be limited to the
unexpired term of the original warranty. The buyer shall be responsible
for all shipping and transportation of the product to KBC for any
performance under this warranty.
Conditions and Exceptions:
a. Any accident to this product, any misuse or abuse, alternation, use
in modified form, or any attempt to repair this product shall void this
warranty. These conditions to the warranty include, but are not limited
to, incorrect power connections, physical damage due to mechanical
shock, exposure to moisture, and circuit modification.
b. SHOULD THIS PRODUCT PROVE DEFECTIVE FOLLOWING
PURCHASE, THE BUYER, NOT THE MANUFACTURER, DISTRIBUTOR, OR
RETAILER, ASSUMES THE ENTIRE COST OF ALL SERVICING OR
REPAIR, EXCEPT AS OTHERWISE PROVIDED BY THE TERMS OF THIS
WARRANTY.
c. FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY ON THIS
PRODUCT, THE BUYER IS LIMITED TO THE FOLLOWING DAMAGES. (1)
THE COST OF LABOR TO REPAIR OR REPLACE DEFECTIVE PARTS OR
PORTIONS OF THIS PRODUCT, AND (2) THE COST OF THE REPAIRED
OR REPLACE PARTS OR PORTIONS OF THIS PRODUCT.
d. NO OTHER EXPRESSED OR IMPLIED WARRANTIES HAVE BEEN
MADE OR WILL BE MADE ON BEHALF OF KBC WITH RESPECT TO THE
SALE, REPAIR, INSTALLATION, OPERATION, OR REPLACEMENT OF
THIS PRODUCT. KBC DISCLAIMS ANY IMPLIED WARRANTY OF
MERCHANTABILITY OF THIS PRODUCT OR ITS FITNESS FOR ANY
PURPOSE, AND THE BUYER AGREES THAT THIS PRODUCT IS SOLD
“AS IS” AND THAT THE ENTIRE RISK OF QUALITY AND PERFORMANCE
OF THIS PRODUCT IS WITH THE BUYER, EXCEPT AS OTHERWISE
PROVIDED BY THE TERMS OF THIS WARRANTY.
e. Some states/jurisdictions do not allow exclusions or limitations of
incidental or consequential damages, or limitations on how long an
implied warranty lasts, so the above exclusions or limitations may not
apply to you.
f. If you do not wish to be bound by any of the provisions in this
warranty, please return the product(s) immediately.
4. Contact your dealer regarding return authorizations for out of
warranty repairs and any further product information.
This warranty does not apply in Australia.