KBC Networks MCG1-S2-BS User Manual

Page 7

Text mode
Original mode

Manual-MCG1-Rev1204.pdf

Page 7 of 8

www.kbcnetworks.com

LED Labeling:

Please affix the provided LED labels to the slot to which the card is inserted.

LEDs Definition:

POWER: On if Power Supply is plugged in.
FIB: Lit when fiber link is established and no traffic is detected.
100M:

LAN 100Mbps Speed Indicator. Lit only when link speed is 100Mbps.

1000M: LAN 1000Mbps Speed Indicator. Lit only when link speed is 1000Mbps.
L/A: Lit when copper link is established and no traffic is detected.

Blinks when copper link traffic is transmitted or received.

DUP: LAN Full duplex Indicator.

An unlit LED means half duplex mode, and a lit LED means full duplex mode.

2.3 Caution

• Switch off all power supply before installation.
• Ensure fiber is properly aligned to the receiving connector. Avoid forcing in the fiber.

• The POWER LED is on if the device is under power and operational.