KBC Networks MCG1-S2-BS - Manual (Page 3)

Manual-MCG1-Rev1204.pdf
Page 3 of 8 www.kbcnetworks.com
Copyright © KBC Networks Ltd.2012
1. Overview
1.1 Introduction
The MCG1-S2-BS Series 1000M auto-sensing Ethernet Fiber Optic Transceiver is
designed using advanced fiber optic technology. This series transmit and receive 1000
Mbps (no adjustment is required) data over 2 single-mode optical fibers, extending the
Ethernet transmission distance from its normal few hundred meters to 2 kilometers. The
MCG1-S2-BS Series is auto-negotiation, port auto-negotiation mode is according to
connection speed and duplex mode of the device on the other side, automatically adjust its
speed to the highest public level, that the line ends can be made with the fastest speed and
duplex mode. By using optical fiber as transmission media, this series continue to perform
its secured, high-speed and long-distance communication even under the adverse
condition such as lighting, power surge and electromagnetic interference; substantial
saving on lighting and power surge protection equipments if copper wires were used.
The MCG1-S2-BS Series is fully assembled using SMT components for stability and
reliability.
1.2 Technical Specification
ETHERNET
Supporting standards
IEEE802.3 1000Base-T
Data Rate 1000Mbps auto-sensing, Full Duplex or Half
Duplex
Physical Interface RJ45, Atuo MDI/MDIX
OPTICAL
Number of Fibers
2
Wavelength 1310nm
Fiber Type 9/125µm(SM)
Distance 0 ~ 25Km
Connector Type ST/PC