KBC Networks FTL1-M1A-B-MSC - Manual (Page 7)

Manual-FTL1-Rev1009.pdf Page 7 of 10 www.kbcnetworks.com
Copyright © KBC Networks Ltd.
•
AC:
There is no difference between ＋/－; the power supply can be connected into the
device directly.
Transmitter Right View
Connectors:
TX/RX: Fiber Optic ST
LAN: LAN RJ45
Beside the Ethernet RJ45, there are two LEDs:
The green LED: Ethernet Link. Flashing if the link is in OK
The yellow LED: Fiber Link. Flashing if the link is in OK
2.3 Receiver Enclosure
Receiver Top View