Overview – KBC Networks FTL1-M1A-B-MSC User Manual
Page 3
Manual-FTL1-Rev1009.pdf
Page 3 of 10
Copyright © KBC Networks Ltd.
1. Overview
1.1 Introduction
The FTL1-M1A-MSC/FTL1-M1B-MSC Series 10/100M Auto-Sensing Ethernet Multi-mode
Fiber Optic Transceiver is designed using advanced fiber optic technology. This series
transmit and receive 10/100 Mbps (no adjustment is required) data over a multi-mode
optical fiber, extending the Ethernet transmission distance from its normal few hundred
meters to 4 kilometers. By using optical fiber as transmission media, this series continue to
perform its secured, high-speed and long-distance communication even under the adverse
condition such as lighting, power surge and electromagnetic interference; substantial
saving on lighting and power surge protection equipments if copper wires were used.
The FTL1-M1A-MSC/FTL1-M1B-MSC Series is fully assembled using SMT components for
stability and reliability.
1.2 Technical Specification
ETHERNET
Supporting standards
IEEE802.3 10Base-T, 100Base-T
Data Rate
10/100Mbps auto-sensing, Full Duplex or Half
Duplex
Physical Interface
RJ45, DCE interface
OPTICAL
Number of Fibers
1
Wavelength
1550nm (Transmitter); 1310nm (Receiver)
Fiber Type
62.5/125
μm(MM)
Distance
0 ~ 4Km
Connector Type
ST/PC