Junger Audio C8685 - Audio Delay - Manual (Page 3)

digital audio
modular
processing system
C8000
8, 4, 2 Channel Audio Delay
C8685
3/11
location of switches:
initial set up / bus assignment
For the initial setup the CAN ADDRESS selection is the most important setting. To avoid address conflicts
with other C8k modules the CAN address setting must be done with care, because each CAN address
has to be unique! See C8k System manual for details.
The Dip-Switch #4 serves as +16 address range extension for the CAN address switch.
The Dip-Switch #1 is the BUS-EN switch which turns the audio driver circuits on when power is turned on.
This allows you to insert a new module into an existing system without the risk of disturbing signals on
other busses, if the actual bus configuration is unknown.
The INIT button will initialize the module to factory default if one holds it down while power up.