C8305, C8000 – Junger Audio C8305 - MADI (BNC) User Manual
Page 3
digital audio
modular
processing system
C8000
64ch BNC MADI I/O
C8305
phone : +49‐30‐677721‐0
fax :
+49‐30‐677721‐46
info@junger‐audio.com
www.junger‐audio.com
3/11
Jünger Audio‐Studiotechnik GmbH
Justus‐von‐Liebig‐Straße 7
D – 12489 Berlin
GERMANY
installation
Set the CAN rotary encoder to an address, which is not in use by an other module
of a C8000 frame (for details regarding CAN addressing, see C800 system manual).
SW1 = Master
will put the C8305 into clock master mode for the whole C8000 frame.
SW2
= ON enables the CAN “+16” address schema to handle up to 32 modules.
Important Note! In case of MASTER mode, the C8305 must be installed into one of the red colored
fitting rails at the rear of the frame.
Pressing the INIT button during power up will initialize the module parameters to factory default values.