Junger Audio C8305 - MADI (BNC) - Manual (Page 10)

digital audio
modular
processing system
C8000
64ch BNC MADI I/O
C8305
phone : +49‐30‐677721‐0
fax :
+49‐30‐677721‐46
info@junger‐audio.com
www.junger‐audio.com
10/11
Jünger Audio‐Studiotechnik GmbH
Justus‐von‐Liebig‐Straße 7
D – 12489 Berlin
GERMANY
GPI :
Set up of frame wide GPI numbers to trigger a dedicated module function.
If a GPI is detected by an GPI/O module C8802 (TTL I/O) or C8807 (opto/relay I/O),
it will put an associated number on the CAN bus.
Each module in a frame is permanently listening for such numbers
Great care must be taken to avoid same numbers assigned to different functions! Because it will
activate multiple functions, causing great confusion in bigger installations, e.g. where Junger HW
remote controller is in place or GPIs are connected with automation systems.