ILUMINARC Ilumiline™ Inground Tri-12 IP - Manual (Page 19)

Operation
Ilumiline Inground IP Optic 25 Series User Manual Rev. 10 15
DIM1 is the
fastest dimmer
curve and DIM4
is the slowest.
Static Colors
(Ilumiline Inground Tri 12 IP Optic 25 RGB, only)
1. Go to STATIC.
2. Select a color or effect (Red, Green, Blue, or Strobe).
3. Select a color value (000~255) or a strobe frequency (0~20).
(Ilumiline Inground 12 IP Optic 25 WW, only)
1. Go to STATIC.
2. Select a color or effect (Cool).
3. Select a color value (000~255).
Dimmer
Provides four different options to simulate the dimming curve of an incandescent
lighting product.
1. Go to DIMMER.
2. Select a dimmer curve (OFF or DIM1~4).
Procedure:
DIMMER Description
OFF Dimmer curve is linear with fader
DIM1 Non-linear (fastest)
DIM2 Non-linear (fast)
DIM3 Non-linear (slow)
DIM4 Non-linear (slowest)
Color
(Ilumiline Inground Tri 12 IP Optic 25 RGB, only)
1. Go to SETTINGS > COLOR.
2. Select the color method (OFF, RGB TO W, UC).
Procedure:
OFF
When the RGB faders are all set to 255, the output is maximum.
RGB TO W
When the RGB faders are all set to 255, the output is the selected White color (refer to
the following Whites Setting section).
UC
When the RGB faders are all set to 255, the output matches the same color output of
previous versions of this product.