ILUMINARC Ilumipod™ 18g2 IP - Manual (Page 13)

Installation
Ilumipod 18g2 IP Optic WW User Manual Rev. 3 9
If you have not
configured the
DMX starting
address and
DMX mode for each
product, they will all use
their default values. This
means that all products
will operate in unison.
Controllers
The Ilumipod 18g2 IP Optic WW can operate with a standard DMX controller or the
ILUMICODE addresser. The sections below provide information on how to connect these
products to the corresponding controllers. The instructions to operate these products with each
of the above controllers are in the
Operation chapter of this manual.
DMX Controller
The Ilumipod 18g2 IP Optic WW can work with a standard DMX controller. The channel
assignments will depend on the chosen personality (see the corresponding
Menu Map section)
and the DMX address assigned to each product (see the Programming section).
The figure below illustrates how to connect the DMX controller to the Ilumipod 18g2 IP Optic
WW.