Future Automation PLH - Manual (Page 7)

C
DETAIL C
SCALE 1 : 3
Stage 5
Positioning The Base Panel
There should be a gap of about 3mm
around the edges of the base panel to
the cabinet.
See Stage 2 for instructions on fixing
the base.
CABLES
The cables for the screen
should pass up through
the pole up to behind
the plasma screen.
Sheet 6 of 17
ISSUE: 006
www.futureautomation.co.uk
FUTUREAUTOMATION
PLH
Plasma Lift Hinge Mechanism
Instruction Sheet