Future Automation PLH - Manual (Page 3)

Stage 1
Check The Operation Of The Mechanism
OUT: Reveal Screen
IN: Hide Screen
STOP: Stops Mechanism
See SHEET 11 for further
controls
Connect the supplied IR
remote and check that the
mechanism operates
correctly before continuing
with the installation.
CONTROLS
Firstly, remove the
cable ties that keep the
mechanism safe and
secure during transit.
There are usually 6 ties
in various locations.
However, on some models
there may be more than
6 cable ties.
Once all the cable ties
have been removed, then
the mechanism can be
powered up and tested.
Sheet 2 of 17
ISSUE: 006
www.futureautomation.co.uk
FUTUREAUTOMATION
PLH
Plasma Lift Hinge Mechanism
Instruction Sheet