Future Automation PL - Manual (Page 9)

In
st
all
at
io
n
: S
ta
ge
4
Page 8 of 20 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PL - Plasma Lift
Adjusting the Top Stop Position
By adjusting the white screw up or down, you can adjust
the stop height of the lifting beam and also, the base panel.
Once the height is set, you will need
to make the base level by adjusting
the strap hanger at the other end of
the lift, shown to the left.
Adjustable Hanger Non-Adjustable Hanger