DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual
Page 8
PIP Adjustment
You can adjust the Small screen’s size and position by using the remote control.
To adjust size, you need to switch to the small screen and press the button（＋）
（－） to
enlarge or shrink the screen.
To change the position,
1. You need to press Menu
2. Switch to Display mode
3. Move to the PIP H Position (Horizontal) or PIP V Position (Vertical) and press
Enter
4. Press Cursor Right and Left to move the position
Aspect Ratio
You can change the screen aspect ratio by pressing the WIDE button on the remote
control. There are four modes to choose, Full for full Screen, 16:9 for 16:9 screen ratio,
4:3 for 4:3 screen ratio and Native for the DS0706L screen ratio. If you use PC with AP3
to be the source, you need to choose Full to get the best quality. As for other sources, you
need to choose Native. Native is the default Setting for DynaScan. display.