DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 7)

Display mode adjustment
1. Single
2. PBP
3. PIP
4. POP
Display
Mode
5. WPOP
Steps
To change the Display mode of the selected screen, you can press POP button on the
remote control to switch between four modes, PBP, POP, WPOP, Single, or change it
according to the instruction as below. If you want to switch to PIP mode, just press the PIP
button.
1. Press “Menu” button to open main menu
2. Use right cursor to move to Display mode
3. Press Enter to activate the setting (Light bar becomes brown)
4. Press Cursor Left or Right to change mode.
5. Press Enter to go back
1 2
3 4
5