Doremi ShowVault / IMB - Manual (Page 8)

CRT.OM.001420.DRM Page 8 Version1.6
Doremi Labs
3 IMB Board Installation Procedure

The IMB is illustrated below:
Figure 4: IMB with Christie Front Panel
3.1 IMB Board
3.1.1 HD-SDI Input

Dual HD-SDI input compliant with SMPTE 292M and SMPTE 372M.

HD-SDI input capable of supporting 3 GHz signals per SMPTE 424M. Mapping per
SMPTE 425M is not implemented yet, but it will be available via a software update.

The following are 2D formats that are currently supported on the HDSDI input of the IMB:
Format\fps 23.98 24 25 29.97 30 47.95 48 50 59.94 60
720p X X
1080i X X X X X
1080p X X X X X
3.1.2 HD-SDI Output

IMB Revision A: HD-SDI output is not available.

IMB Revision E: Dual HD-SDI output compliant with SMPTE 292M and SMPTE 372M.
HD-SDI output capable of supporting 3 GHz signals per SMPTE 424M.
Note: With the current firmware, the HD-SDI Output is not used.